How To Raise Handlebars On Mountain Bike?

How To Raise Handlebars On Mountain Bike

In this post, I will explain how to raise handlebars on mountain bike so read on.

There will be a few different ways you can do this and we’ll cover them below. Before we dive in, let’s talk about why you might want to make this change and how it can impact your ride.

The benefit of raising your handlebars is that it puts less strain on your back and neck as you’re riding. This is especially important if you spend a lot of time on bikes or have any ongoing back pain issues.

I elevated my handlebars on my mountain bike by putting washers under the bolt that holds the stem to the bike’s frame. I then tightened it up. I elevated my handlebars by using long bolts, washers, and nuts.

I loosened the bolts on the bike’s frame, slid long bolts through them, put a washer on each side of the bolt near the top of the frame. I then tightened up everything by putting a nut on each bolt. I made sure to tighten everything to make sure it wasn’t loose.

You could also use a stem riser if you don’t want to mess with the bolts on your frame. A stem riser is a little piece of metal or plastic that goes between the handlebars and the stem. It raises the handlebars by a certain amount, usually an inch or two.

If you have a bike with no suspension, you may also want to raise the handlebars a bit in order to make it more comfortable to ride.

There are many ways to raise the handlebars on your mountain bike. You can use different bolts, washers, and nuts to do it. You can also use a stem riser. If you have a bike with no suspension, you may want to raise the handlebars a bit.

The good thing about mountain bikes is that they allow for customization. Nowadays, there are even carbon fiber mountain bikes. Mountain biking has evolved quite a lot since its origin in the 1970s. As technology continues to advance, so does mountain biking!

Mountain bikes are also good because they allow for customization. You can raise the handlebars, change the seat position, or change the suspension to fit your needs and make riding more comfortable.

There are many ways to customize it even further by changing its color with paint pens or flocking spray, adding reflectors and lights so you can ride at night and stay visible and safe, or adding stickers to the frame.

The possibilities are endless when it comes to mountain biking, and that’s part of what makes it so much fun! So get out there and have some fun! And be sure to raise those handlebars before you do!

How To Raise Handlebars On Mountain Bike?

Here are two easy ways to adjust the bars:

Locate the stem which attaches the handlebars to the frame (usually found near where your seat would be).

Once located, loosen off both bolts with a wrench so they come free (counterclockwise).

Option 1: Moving the Stem

The first option is to move the stem up. This can be done by loosening the bolts on the top and bottom of the stem and then moving it up to the desired height. Be sure to re-tighten the bolts when you’re done so it’s stable.

Option 2: Extending the Stem

If you don’t want to move the stem, you can also extend it instead. To do this, you’ll need a longer bolt and two spacers. The spacers go on either side of the stem and the bolt goes through the middle. Loosen the bolts on the top and bottom of the stem, put the spacers in place, and then re-tighten. Be sure to use a washer on each side of the spacer so it doesn’t damage the frame.

Lastly, adjust your handlebars to the desired height and then tighten down the bolts (clockwise).

How To Raise Handlebars On Mountain Bike

Can I raise my bike handlebars without removing them?

Yes, it is possible to raise your bike handlebars without removing them. All you need is a hex wrench and a few minutes of your time. To raise your bike handlebars, follow these steps:

1. Loosen the bolts that hold the handlebars in place with a hex wrench.

2. Raise the handlebars to the desired height and re-tighten the bolts.

3. Test the new height by riding your bike around the block.

If you’re not happy with the new height, you can always lower them again by following these same steps.

Does the size of bike affect where I can put my hands while riding?

The size of your bike will not affect where you can put your hands while riding. You can still place your hands in the same position regardless of the size of your bike. However, keep in mind that the larger the bike, the more leverage you will have when turning. This may affect your ability to reach the brake levers and shifters.

Can I raise my mountain bike handlebars if they are already as high as they can go?

If your mountain bike handlebars are as high as they can go, you can still raise them higher. However, you must remove the handlebars from your bike in order to do so.

You should now be ready to hit the trails!

References: How to adjust your handlebar height

Johan Oakley

Hi, I am John Oakley- The Guy behind this site. I am an avid hiker and love to try new mountain bikes. I love to experiment with new gear for biking and cycling and this site is a result of my passion for reviewing and checking the best mountain bikes and accessories.

Recent Posts