How To Derust A Bike Chain?

How To Derust A Bike Chain

The need for a bike chain deruster most often arises when the rider neglects to maintain their bicycle. A rusty bike chain can cause the sprockets and gear teeth of your gears to wear, which in turn leads to more frequent repairs or replacements. Fortunately, there are ways on how to derust a bike chain without having to purchase any new parts for your machine. The easiest way is with WD-40 and a rag!

Is rust on a bike chain bad?

Rust on a bike chain can be bad because it can make the chain difficult to move, and eventually it will wear down the chain.

There are a few ways to remove rust from a bike chain: you can use WD-40, vinegar, or lemon juice. I would recommend using WD-40 because it’s the easiest to use and it works well.

All you need to do is spray the WD-40 on the chain and then wipe it off with a rag. If you want, you can also put the chain in a plastic bag and spray it. Then dump out the excess WD-40 and wipe off the excess rust that is on the outside of the chain.

If this doesn’t work, then try using vinegar or lemon juice to remove rust from your bike chains. I would recommend using vinegar because lemon juice can leave your chain sticky.

All you need to do is put some vinegar on the rag and then wipe it on the rust spots on the bike chain. You can also dump out excess vinegar, or let it dry up. Then just rinse off with water and wipe down the outside of the chain thoroughly.

If this doesn’t work either, then you can take your bike chain to a bike shop and have them remove the rust for you.

No matter what method you choose, it’s important to clean and lubricate your bike chain regularly to prevent rust from forming in the first place. You can use WD-40, bicycle oil, or motor oil to lubricate your chain.

How To Derust A Bike Chain?

First, give your bike chain a good spray with WD-40. You can do this by removing the chain from your bike and spraying it directly. Make sure to direct the WD-40 onto both sides of the chain (if you can access it) as well as any points that are especially rusted or dirty.

Once you’ve given the WD-40 a few minutes to penetrate and loosen the rust, take a clean rag and wipe off the chain. Be sure to get all of the WD-40 off (and the rust) so that your chain is free of any debris or chemicals. If you have any stubborn areas of rust on your chain, you can use some steel wool to scrub them off.

After you’ve derusted your bike chain, it’s a good idea to apply some lubricant to keep it healthy and functioning properly. This can be done with a commercial lubricant or even just some household oil (like olive or vegetable). Apply the lubricant to the chain and then wipe off any excess so that it doesn’t attract dirt or dust.

Does vinegar remove rust from bike chain?

Most people know vinegar can be used to remove rust from the outside of metal objects, but it also removes rust from the inside. This is because vinegar is a strong acid that attacks and breaks down iron oxides on surfaces, including those inside objects.

Acids are corrosive and often cause damage to other materials in addition to removing rust, so they should only be used on small areas or with extreme care. In fact, even household cleaners such as ammonia have been known to corrode steel wire mesh filters when mixed together in a bucket.

Vinegar usually doesn’t leave behind any damaging residue after being applied either; instead it just leaves a clean surface free of rust. There’s no need for rinsing afterwards either since there’s no acid left on the surface.

How To Derust A Bike Chain

How to remove rust from bike chain with vinegar

Pour white distilled vinegar into a small container. Soak the rust-affected chain in the vinegar for about 15 minutes. Use a brush to scrub off any remaining rust. Rinse off the chain and let it dry completely. Lube the chain with a rust-proof lubricant to prevent future rust build-up.

Does lemon juice remove rust from bike chain?

Lemon juice contains citric acid which breaks down iron oxide deposits; the same chemical that makes up rust. While it’s possible for lemon juice to remove rust, it can also damage some iron materials in the process.

How to remove rust from bike chain with lemon juice

Squeeze the juice of half a lemon into a small container. Soak the rust-affected chain in the lemon juice for about 15 minutes. Use a brush to scrub off any remaining rust. Rinse off the chain and let it dry completely. Lube the chain with a rust-proof lubricant to prevent future rust build-up.

If you follow these simple steps, your bike chain should be free of rust and ready to ride! Just be sure to keep up with regular maintenance in order to prevent any further build-up.

Ride safe!

Reference : HOW TO CLEAN RUST OFF A BIKE CHAIN

Johan Oakley

Hi, I am John Oakley- The Guy behind this site. I am an avid hiker and love to try new mountain bikes. I love to experiment with new gear for biking and cycling and this site is a result of my passion for reviewing and checking the best mountain bikes and accessories.

Recent Posts